Anycubic Photon S Review: Specifcations

10Expert Score
Anycubic Photon S

The detailed Anycubic Photon S Review to help you in your buying decision. Go through our comprehensive research.

Print Quality
User Friendliness
Assembling & Setup


Anycubic Photon S Review: The Anycubic Photon S uses SLA technology for 3D printing. But the majority of desktop printers use FDM 3D printing technology.

Although SLA printers are not used by the majority but have a reputation of printing high-quality prints more than FDM. Photon S by Anycubic is an improved version of the original photon.  The prints are excellent and are very detailed. 

Source: Anycubic

Anycubic Photon S’s Salient Features

The Anycubic Photon S isn’t the most expensive 3D printer on the market, but it has many vital features. The following points will help one analyze the core features.

High-quality printing

Although the Anycubic Photon S is in the lower price range, it creates better prints. With the Photon S, one can get excellent print quality. 

As it is a resin printer, the print layers are of higher quality than their FDM equivalents. It’s also suitable with photosensitive resins with a wavelength of 405 nm, giving users a lot of options. 

Creators will be getting much more benefits for the price they pay. For a similar price range, one gets more features as compared to the other 3D printers. Even if it isn’t flawless, the quality-to-cost ratio is excellent for the price.

User Friendly

A user-friendly interface is the most desired feature of any 3D printer and since the Anycubic Photon S offers this, it is ideal for beginners. The LCD screen on the printer simplifies 3D printing. 

Photon S is surety for beginners or people having limited experience as the workflow is simple. Getting started using the printer will not take much time. Very soon one can start printing really good 3D models.

 The plug-and-play software technology is the smoothest controllable software for beginners. But as time goes on, one can expect an upgrade to the advanced slicer.


An extra advantage of the Photon S is that it does not need much assembly to get it up and run. Anycubic Photon S needs less time to get assembled. 

To get the easiest way to get started with 3D printing, the Anycubic photon S is worth a try. Unlike some other 3D printers on the market, the unboxing of Photon S is real quick, which starts 3D printing in less time.


The Photon S lacks Wi-Fi connectivity. Only a USB port is available for connectivity. It is frustrating as there are various 3D printers in the same price range that feature Wi-Fi connectivity. 

This isn’t a barrier, but having Wi-Fi on the Photon S would give it a significant advantage over the original Photon.

Air Filtration System

The Photon S’s air filtration technology is a massive change over the original Photon. The usage of various chemicals during 3D printing releases a variety of toxic fumes. The Photon S’s improved air filtration system cancels the bulk of unpleasant odors. 

This technique may not end the stink, but it does a fantastic job of reducing it. On using the Photon S in a good ventilated area, the stench from the print materials need not be an issue.


The Photon S comes with a 12-month warranty, albeit the LCD screen covers only for three months. 

There have been 3D printers with longer warranties, but this is not such a big issue. Because the Photon S is well-made, it’s doubtful that owners will have many issues with it.

Well built

The Photon S is a durable machine and also well constructed. It is long-lasting and well-built, making it perfect for beginners or budget-conscious 3D printing lovers. 

The 3D printer gets 12 months cover, but the LCD screen only gets three months cover.  A better warranty would have gone a long way towards user satisfaction.

Operations Usability

If one is new to SLA printing, even if they have been working with FDM printers for years, still there is much to learn about SLA. That’s why the Photon S’s simple functioning is so crucial. 

It includes a new and enhanced touchscreen and interface that makes communicating with the machine so much easier. 

The printer’s auto-leveling capability has been simplified to a single screw action. This allows most users to get up and running in more or less within 30 minutes.

Quality Design and Build

The Anycubic Photon S is remarkably well-built for such a low-cost printer. Both the resin tube and the build plate make use of machined aluminum. The printer’s frame on the other hand is made of stamped sheet metal.

Software and User Interface

The onboard user interface of the Photon is about as simple and easy as one would expect. One would be hard-pressed to get lost or confused with this user interface’s menu directory, which are bare-bones. 

Plus, because it’s all touchscreen, moving between settings is a breeze, so anyone who can use a smartphone can use this printer.

Photon Slicer, Anycubic’s proprietary slicing program, is also straightforward. Even non-technical folks cannot find it confusing while using it. 

Though it’s a little on the crude and utilitarian side, not very nice to look at. The software can be compared to using a CAD program with minimalist features.


The printer employs LCD-based masked SLA technology, which is uncommon in printers in this price range. The Anycubic Photon S boasts a 5.2-inch 2K LCD screen that allows one to watch and operate while the printing process is in progress.

The printer’s build volume is 115 mm * 65 mm * 65 mm, and its Z-axis resolution is 47 microns. The printer includes a 2.8-inch Color TFT Touchscreen for convenience of use in the user interface.

A USB cable is required to connect with the machine. Unlike other printers, the Photon S has a manual build platform leveling system.

The printer can make use of any resins acceptable for LCD-type 3D printers with a wavelength of 405 nanometers.


The printer comes for a very economical cost of $419. It is noteworthy that Anycubic has managed to keep the price of the printer so low. The company’s energy and spirit: to make technology affordable to smaller businesses, no less than a match 3D printer.

Because the technologies are evolving, SLA 3D printers are not currently available in the range of desktop printers. Aside from the technology, the printer has built a volume that is comparable to its competitors.

First impression

AnyCubic Photon S appears like the SLA 3D printer that is almost the size of an air filter. The reason behind it is the quality construction of plastic casing. It is much better than its competitors in the same category.

Anycubic Photon S is lighter by over a pound than its metallic predecessor, Anycubic Photon, which some users may prefer to use since they believe in quality construction.

The resistance felt while knocking it off the ground after pushing it from the back or any other side. As a result, Photon S will have a balancing issue. The stable architecture compensates for this, making it appear to be a minor flaw.


The Photon S has a simple design and minimal moving parts on the outside. The printer’s compact size of 200x220m and height of 400mm ensures that it takes up little space in the workshop.

On the front, a tiny LCD touchscreen allows one to access settings and choices. It’s hardly the slickest UI I’ve ever seen, but it gets the job done. The primary mechanics of the machine hide behind the flip-up safety door above this screen.

Files transfer to the system through USB or an 8GB USB stick included in the box by AnyCubic. On the USB key is an example model, a detailed cube that demonstrates the quality of a 50-micron print. A full-fledged hinged door covers and protects the print area. On opening, one can see the build platform and resin bath.

A depression on one edge of the bath allows for easy resin pouring through filters once each sculpture ends.

The base of the resin bath is made up of a single sheet of PEI. This is held on place using a set of bolts to clamp it down tightly. 

Because these sheets deteriorate with time, it’s nice to see that AnyCubic provides an easy way to replace them when necessary. The tiny metallic build platform is kept in place using a thumbscrew.


Users will find themselves playing with the Photon S in the same way that a 10-year-old would with a new toy. They would use the built-in controls to move the print platform upward or downward.

The difficult part will come when one has to set up this printer and get it to work. It’s difficult to try by attempting to figure it out by themselves. Yet, after about a half-hour with Photon S, they will be able to put everything in place.

While performing this task, the company’s YouTube tutorial video would be useful. 

To level the print platform, insert a piece of paper below it and lower it until one can feel the paper does not move. The entire setup process should be completed in less than half an hour by following the instruction video.

Printing type/cost

The cost of the resins is inexpensive and Photon S lets customers print using a variety of resins.

Photon S does not need as much electricity as other SLA 3D printers, but it does consume more than FDM 3D printers because it has an extra light source that powers on. Nonetheless, the printing costs justify in the long run.


The level of the build platform calibrates before the first print. The instructions contain the entire procedure. The Build Platform has a little grub screw that is removed before the calibration procedure; this allows the platform to move side to side.

On removing the resin bath and placing the build platform in position, go to the “Tools” menu, pick “Move Z,” then “Home,” and the platform slides down.

After the calibration is completed, there is only one more test before beginning with the resin. After raising the platform to 120mm, select “Tools > Detection > Next”.

This turns on the LCD and does a quick test to ensure that everything is operational. After that, the resin tank is reinserted and one is good to go. 

Print quality

The print quality is truly outstanding. One cannot find a better SLA printer for the same price range as the Photon S.

No affordable FDM printer on the market can compete with the print quality of a competent resin printer.

X, Y, and Z resolutions make the Photon S suitable for tiny, high-resolution prints of all kinds. The Photon S has a Z-Axis resolution of 0.01mm and an X-Y Axis resolution of 0.047mm.


Slicing is the last stage in creating the 3D print design, and it’s done in this printer using the AnyCubic Photon Workshop slicer software. This software is included in the printer’s retail package on a flash drive.  One can start creating print models without becoming an expert.

Users may learn about 3D models by downloading them for free from a variety of web venues.

Customer service

The major drawback of Anycubic is that they do not have any contact form or contact number. But they have their YouTube channel where they explain various things which might be helpful for many users.

Anycubic printers come with a 12 months warranty period whereas LCD has only 3 months. This should be enough as compared to competitors.

The verdict

Anycubic’s successful strategy modifies the Photon S making it better. The new user interface is different from the previous version and makes the unit easier to use.

The Anycubic Photon S is simple and can even make higher-quality prints, which was before an issue.

FDM 3D printing may become boring after a certain period due to its complex nature. If one has a small business and wants to improve the quality of the prints, the Anycubic Photon S is the right printer for this job. 

Educational institutes may use this newer technology to educate students about 3D Printing.

We will be happy to hear your thoughts

Leave a reply

Enable registration in settings - general